Nice Paper Toys

Edgar Rolando Antunes L. Castelo's Blog (22)

A Ray-Gun, and a great Papercrafter!

This work of mine is not Papercraft, but it might give you guys ideas...

 

This one's not mine, but a great inspiring piece of work:…

Continue

Added by Edgar Rolando Antunes L. Castelo on February 22, 2013 at 3:30pm — No Comments

Papercraft Head from a Photo Site!

On today's Gizmo Blog, your Papercraft head from Photos, incredible Materials, and a Cork Sauna!…

Continue

Added by Edgar Rolando Antunes L. Castelo on January 26, 2013 at 9:49am — No Comments

Papercraft Stop motion!

You guys gonna love this!

2 Ways to Papercraft Stopmotion

by kamibox.de

Good morning,…

Continue

Added by Edgar Rolando Antunes L. Castelo on January 20, 2013 at 5:00am — No Comments

Future Webpage, and a Ray Gun of mine, and another Paper Toy seller

Merry chistmas, and a Happy New Year, ho, ho, ho...

Ok, Christmas is over, but the Seasoon's goodies are not.

Just started dabbling with Wix, and so, here's the looks of it, so far...…

Continue

Added by Edgar Rolando Antunes L. Castelo on December 27, 2012 at 5:23am — No Comments

Theo Jansen walking machine... On Paper!

Hello, there, sorry, long time no post!  :(

Just found out about this great piece of work, by ghostwhowalks, and I've thought you'd like to know, too:…

Continue

Added by Edgar Rolando Antunes L. Castelo on December 17, 2012 at 12:13pm — 2 Comments

Fridge magnet band Halbach Array Monorail

Yes, you can embed an Halbach Array, into your own Papercraft projects!

And what the heck's an Halbach Array?

Just put a lot of Magnets on a row, easch one 90 degrees rotated in relation to the previous one, like this...…

Continue

Added by Edgar Rolando Antunes L. Castelo on October 6, 2012 at 1:30am — No Comments

Venetian House on Papercraft

Just thought of sharing this wonderfull Venitian house, I think I've heard of Paspemau, here, but this Site is really nice...…

Continue

Added by Edgar Rolando Antunes L. Castelo on September 11, 2012 at 1:00am — No Comments

Japanese Genius

What can I say? This guy is Japanese...

And he's a Genius!

http://www.gizmag.com/walking-paper-robot-elastic-bands/23877/

Added by Edgar Rolando Antunes L. Castelo on August 28, 2012 at 4:00am — 6 Comments

Tetrapak

Hello there, long time no Post! :D

Having my fill of chain emails, about cell-phone dangers, I've already made one Instructable, but I've recently looked at all this trashed Tetrapak carton, and figured, this way, you've already get the Aluminum foil, inside the cardboard, one less hurdle!…

Continue

Added by Edgar Rolando Antunes L. Castelo on August 19, 2012 at 7:30am — No Comments

Bender's back!

A big Olá, from Portugal!

Well, I just saw this Inexpensive Soft Metal Bending Tool, and I though it can be a good Plastic/Cardboard/whatever Bender, too! :D

Inexpensive Soft Metal Bending Tool…

Continue

Added by Edgar Rolando Antunes L. Castelo on July 26, 2012 at 7:42am — No Comments

Cardboard springs!

A cool add-on to the world of Papercraft, Cardboard springs! The Instructable's here:…

Continue

Added by Edgar Rolando Antunes L. Castelo on July 9, 2012 at 2:41pm — 9 Comments

Wonder material, Metal Paper!

 Awesome thing for Papercraft, methinks...

 

Metal Paper

[MET 004]

£29.99 ex.VAT £35.99 inc.VAT

 

Based on 0.02mm gauge aluminium foil with a matt black polymer coating both sides, it feels and behaves like a…

Continue

Added by Edgar Rolando Antunes L. Castelo on July 2, 2012 at 7:25am — No Comments

It won't mean a thing, if it ain't got that Video

Yes, one isolated Gearwheel won't mean it works, so here's a pair of them, WORKING, like Gearwheeels work:

So now you see, it runs like clock-work!…

Continue

Added by Edgar Rolando Antunes L. Castelo on June 25, 2012 at 1:55am — No Comments

The rounded Gearwheel!

It may well be I'm the only one interested, but I finally got to produce that 9 teeth, rounded Gearwheel I mentioned...

And here it is:

You can resize it to any radius, and teeth number, and it's always the same routine, see the tooth tip part, upper right?…

Continue

Added by Edgar Rolando Antunes L. Castelo on June 21, 2012 at 9:00am — No Comments

What was I thinking?

So much work, so many tiny parts...

And the Printer's acting up on me, too!…

Continue

Added by Edgar Rolando Antunes L. Castelo on June 15, 2012 at 10:30am — No Comments

Back to the Drawing Board...

I didn't liked the Gearwheell, so I went back to Inkscape, made a new 9 teeth gearwheel, and did Path>Dinamic Offset to it.

Changed the Offset, from Object to Path, combined the 2 Paths, and done the labourious routine of eliminating the curved segments, and joining the straight lines between the 2 Paths, that's Break Path at selected nodes, and join selected nodes with a new segment...…

Continue

Added by Edgar Rolando Antunes L. Castelo on June 13, 2012 at 8:30am — No Comments

A quick Sketch

Just to see if it worked, here's a 9 teeth gearwheel:

 

Made from Inkscape's Extensins>Render>Gear, I added the needed parts, piece by piece, like add a square, snap to Path, rotate 40 degrees, group...

 

Ended up this way:

 …

Continue

Added by Edgar Rolando Antunes L. Castelo on June 12, 2012 at 11:01am — No Comments

Can't give it a rest!

Can't give it a rest!

Here's my new Frame version, and I'll add the Vector File, so you can make your own Frames, just change the Dimensions:

And here's the File:…

Continue

Added by Edgar Rolando Antunes L. Castelo on June 8, 2012 at 10:08am — No Comments

Framed!

If you frame it, it looks like this:

 

A word of warning, Plastic Sheet is not easily creased in larger than 15 cm, more or less 3 Inches, unless you get to make a really strong outfit, and since you're into it, make it go on a perfect straight line, with a guiding…

Added by Edgar Rolando Antunes L. Castelo on June 6, 2012 at 9:12am — 2 Comments

Meccano, for a prefect Crease

This great new opportunity Computer aided Paperctaft gives for a lot of Modeling, and Gizmo fun, got me thinking, why only Paper, great Media it is, there's also Plastic Sheet, and so many others...

So I came up with this Crease Rig, just some Meccano pieces, to make a slot, and a third one, to make a neat and easy Crease, on harder meterial:

It works like this:…

Continue

Added by Edgar Rolando Antunes L. Castelo on June 5, 2012 at 7:00am — 6 Comments


Forum

Test builders 3 Replies

Started by Shadree in Uncategorized. Last reply by Shadree Aug 20.

Another PaperToy idea I have

Started by Daveybird in Sample Title Jul 22.

Anyone hunting for Old Cardboy Papercrafts? (Back after 4 years) 11 Replies

Started by Adam T in Sample Title. Last reply by Orchidia Jul 18.

Site overrun by spam

Started by Neurogami in Sample Title May 19.

building new toys!

Started by ryan ellison in Uncategorized Nov 5, 2013.

Tools (Software) 43 Replies

Started by Tephlon in Uncategorized. Last reply by ryan ellison Nov 3, 2013.

SpeakerDog 20 Replies

Started by fivz wu in Sample Title. Last reply by sasha lim Oct 19, 2013.

Your first papertoy 56 Replies

Started by Tawa in Uncategorized. Last reply by merrci Sep 25, 2013.

Papertoy designers Database 58 Replies

Started by BW in Sample Title. Last reply by Mike P Sep 3, 2013.

New Paper Toy Site

Started by Daveybird in Sample Title Jun 9, 2013.

Badge

Loading…

About

Castleforte created this Ning Network.

© 2014   Created by Castleforte.

Badges  |  Report an Issue  |  Terms of Service