Curves. WTF.

Replies to This Discussion

Permalink Reply by Alexander Gwynne on March 3, 2011 at 2:17pm

Hay man, I'll drop you a video explaining some ways to do curves :).

• ▶ Reply

Permalink Reply by Dan Watson on March 3, 2011 at 3:04pm

Curves suck!.....

Im creating my 2nd toy and thankfully the curved part is the part I have done!

I cut out card until they fit together mainly, then used Blender to make it exact (could of probably started in Blender) (There are some great Blender tutorials on Youtube)

Then Pepakura to unfold it

And a tiny bit of maths.

 

Im sure Alexander's video will help more than that! but I thought I would throw in my 2c =)

 

 

• ▶ Reply

Permalink Reply by Matthijs Kamstra aka [mck] on March 4, 2011 at 1:28am

I'm very curious what the video of AlexG will look like.

 

I have tried to make curved papertoys and it was not easy. I used the trail and error method... not really a good solution.

 

I have read somewhere (can't tell you where) on NPT that someone (don't know who it said) to use a piece of little piece of string (rope). Create a shape that is curved, print it out (100%) get a little piece of string and follow the curve with the string from beginning till end.

Measure the length and you know how long the curve is.

 

There are better methods, but you have to make a 3d model and let the 3d program flatten the design. I can't tell you anything about that because I just don't know!

• ▶ Reply

Permalink Reply by Mike P on March 6, 2011 at 3:08pm

One of the best ways to learn is to build from artist who have already used curves, study and mimic. 

But, Im also waiting for Alexs vidi.

• ▶ Reply

Permalink Reply by jasoncbolt on December 11, 2012 at 9:59am

I would like to see your video too alex.

• ▶ Reply

Permalink Reply by Steo on December 13, 2012 at 3:41pm

Never heard of that string trick, but it sounds workable. I'm going to use it in a new toy.

Thanks mck!

• ▶ Reply

Permalink Reply by Bry on January 3, 2013 at 4:13pm

If you use Adobe Illustrator, you can get the length of any path.

1) (top Menu) Window --> Document Info
2) on that panel, select the option "Objects" from the fly out menu.

this will give you the length of a path curved or otherwise. (i use the scissor tool to cut apart paths/objects so so i can get the length of just the curved line segment)

might be ways of doing this in InkScape or other free vector programs.

• ▶ Reply

Permalink Reply by Shadree on January 10, 2013 at 8:41pm

I did find a formula for calculating curves in case you don't have Illustrator.

For more complicated shapes, here's an idea:

I haven't implemented this method yet but I had this idea on making spherical/arc papercraft: I get a curved object (eg stress/tennis ball) and layer a piece of paper over it. The paper has 3 strips cut at the end and I slide the left and right pieces into the centre. I then tape them in place and then run a texta over the joins. When you take it back apart you can see the lines to make the template.

If I get it working (I'm wanting to do one soon), I'll post some pictures.

As an alternative - like when doing vehicle fronts - just do a lot/few angles to make the illusion of round.

• ▶ Reply

Permalink Reply by Sinner on January 11, 2013 at 5:17am

I use the string method for any pieces I want to hand create rather than with blender or Sketch-up.

Curves do look awesome though when done well, but I generally use the technique mentioned above and have a lot of angles rather than a perfect curve.

• ▶ Reply