Making it BIGGER!

Replies to This Discussion

Permalink Reply by brainjar on March 31, 2008 at 7:35am

Everything larger then A3 will be costly. I got a copy shop around the corner where they have a digital Xerox machine, so i can go with my USB-Stick and they can print directly from the file, in color, up to A3 size, up to 300g paper. Costs are quite ok if you only need a few pieces. I think with the copycard we got A4 (color) from file is around 0.55€ cent. I know it's more expensive if you just go there for one copy tho.
If you can't abuse someones company plotter, i guess that's the max. you can work with. Basicly there is no limit how large you can build with that, as even single pieces you can glue together with paper. Guess the limit will be stability of such a large model and time willing to spend. :)

▶ Reply to This

Permalink Reply by brainjar on March 31, 2008 at 12:52pm

Oh, and on the topic of enlarging graphics a few hundred percent i suggest using a professional filter that's not using the standard Bicubic algorithm. Personally i prefer Genuine Fractals from onOne, but there are others as well. Those plugins are quite expensive tho.

▶ Reply to This

Permalink Reply by Tephlon on April 1, 2008 at 2:26am

I'm glad I work with vectors mostly... :-)

▶ Reply to This

Permalink Reply by mckibillo on April 2, 2008 at 7:47pm

yup, I agree. Vectors FTW.

▶ Reply to This

Permalink Reply by Castleforte on April 7, 2008 at 5:51pm

I design everything in vector. I also have a 13x19 in printer. And I print out as many sheets as needed to fit all of my parts, when doing oversized toys.

▶ Reply to This

Permalink Reply by Dr.Shazam on April 8, 2008 at 5:29am

I've also been working in vector--I just don't really know how to do it any other way, really--I think I'll be printing out individual pieces in the largest scale allowable by the printer width, the largest individual part of the template being the limiting factor to the enlargement factor.

Thanks everyone!

▶ Reply to This

Permalink Reply by Matthijs Kamstra aka [mck] on April 8, 2008 at 6:37am

I have used this site (http://www.blockposters.com/) to blow-up images to poster size.
Perhaps this is usefull? I haven't tried it with papertoys yet.

▶ Reply to This

Permalink Reply by ring on April 8, 2008 at 11:50am

I will try it with my overheadprojector this weekend and colour it with poscas [markers]...
I'll let you know how it worked out ;)

▶ Reply to This

Permalink Reply by ring on April 16, 2008 at 10:15pm

Hell of a job...
Just started with the head

;) Ring

▶ Reply to This

Permalink Reply by brainjar on April 17, 2008 at 2:51am

very cool! Can't wait to see the finished model. What kind of paper do you use?

▶ Reply to This

Permalink Reply by Tephlon on April 17, 2008 at 2:59am

Wow. The "face" looks like it's the size of an A4?

I'd love to see how the body holds up .

▶ Reply to This

Permalink Reply by Tang Mu on May 12, 2008 at 4:26pm

When i was in college 5 years back (strewth its been a while) and building cecil- my 1.5 m gundam based on masamune washington's 15cm plans, i got a bit ghetto:

Photocopy your nets onto acetate and project onto a wall with your paper stuck on. If you use a ruler to measure an edge (say you have a box that is 10cm on paper if it is 50 cm on the wall then its been enlarged 5x). Then just pen and ruler your design.

I only used this to get the outlines and used spraypaint for the colours (only just getting into surface design now...) but it definately works. I used mount board and gluegun glue to hold it all together. Had a 12 hr art exam to make it and it all fell apart at 6 because i was using double sided tape instead O_o.

Tang Mu

▶ Reply to This